4" Round Surface Mount Combination Stop Tail Turn with Backup Light
HD41014RW-2 // 14 LED // Red/White // Red/Clear Lens
Surface mounted style combination stop tail turn and backup light. This is a great choice for a vehicle (perfect for Jeep's) or trailer when you need a stop tail turn light and back up light, but space is limited. Or maybe you are adding this in a place never having a backup light before? Install these and run the extra wire from your backup circuit. Great way to add a backup light without needing another mounting location!
Light is hardwired and requires only a small (approximately 3/4") exit hole for the wires to pass through for hook up. 4 wire design with shared ground wire. Light circuits are polarity protected. Simple connection of wire colors as follows:
- White | Ground (-)
- Brown | Tail Circuit, Low Power (+)
- Red | Stop / Turn, High Power (+)
- Black | White Back Up (+)
- LED: SMD - 12 Red 3528 / 2 White 5054
- Dimensions: 5.48" x 0.84"
- Voltage: 12V
- Volt Range: 7.5-14 VDC
- Stop/Turn: 159mA
- Tail: 40mA
- High: 161mA Backup
- IP Rating: 67
- Terminals: Blunt Wire
- Impact Resistant Polycarbonate Lens
- ABS Housing
- Vacuum Chrome Diode Surround
- Flush (Grommet) Mount (HD40014RW-2)
- ABS Chrome Bezel Included (HD41014RW-2)
- Hardwired, No Connector Required
- 4 Wire Design with Shared Ground Wire.